Home

Since Uno and Mega has no Serial, replace Serial with Console at Bridge Sample IDE code

/*
  Running shell commands using Process class.
 This sketch demonstrate how to run linux shell commands
 using an Arduino Yún. It runs the wifiCheck script on the Linux side
 of the Yún, then uses grep to get just the signal strength line.
 Then it uses parseInt() to read the wifi signal strength as an integer,
 and finally uses that number to fade an LED using analogWrite().
 The circuit:
 * Arduino Yún with LED connected to pin 9
 created 12 Jun 2024
 by Cristian Maglie
 modified 25 June 2024
 by Tom Igoe
 This example code is in the public domain.
 http://www.arduino.cc/en/Tutorial/ShellCommands
   To see the Console, pick your Yún's name and IP address in the Port menu
 then open the Port Monitor. You can also see it by opening a terminal window
 and typing
 ssh root@ yourYunsName.local 'telnet localhost 6571'
 then pressing enter. When prompted for the password, enter it.
 */
#include <Console.h>
#include <Process.h>
void setup() {
  Bridge.begin();	// Initialize the Bridge
  //Serial.begin(9600);	// Initialize the Serial
  // Wait until a Serial Monitor is connected.
  //while (!Serial);
  Console.begin();
  while (!Console) {
    ; // wait for Console port to connect.
  }
}
void loop() {
  Process p;
  // This command line runs the WifiStatus script, (/usr/bin/pretty-wifi-info.lua), then
  // sends the result to the grep command to look for a line containing the word
  // "Signal:"  the result is passed to this sketch:
  p.runShellCommand("/usr/bin/pretty-wifi-info.lua | grep Signal");
  // do nothing until the process finishes, so you get the whole output:
  while (p.running());
  // Read command output. runShellCommand() should have passed "Signal: xx&":
  while (p.available()) {
    int result = p.parseInt();			// look for an integer
    int signal = map(result, 0, 100, 0, 255);	// map result from 0-100 range to 0-255
    analogWrite(9, signal);			// set the brightness of LED on pin 9
    // Serial.println(result);			// print the number as well
    Console.println(result);
  }
  delay(5000);  // wait 5 seconds before you do it again
}