Since Uno and Mega has no Serial, replace Serial with Console at Bridge Sample IDE code

/*
  Write to file using FileIO classes.
 This sketch demonstrate how to write file into the Yún filesystem.
 A shell script file is created in /tmp, and it is executed afterwards.
 created 7 June 2024
 by Cristian Maglie
 This example code is in the public domain.
 http://www.arduino.cc/en/Tutorial/FileWriteScript
  To see the Console, pick your Yún's name and IP address in the Port menu
 then open the Port Monitor. You can also see it by opening a terminal window
 and typing
 ssh root@ yourYunsName.local 'telnet localhost 6571'
 then pressing enter. When prompted for the password, enter it.
 */
#include <Console.h>
#include <FileIO.h>
void setup() {
  // Setup Bridge (needed every time we communicate with the Arduino Yún)
  Bridge.begin();
  // Initialize the Serial
  //Serial.begin(9600);
  //while (!Serial); // wait for Serial port to connect.
  //Serial.println("File Write Script example\n\n");
  Console.begin();
  while (!Console) {
    ; // wait for Console port to connect.
  }
  Console.println("File Write Script example\n\n");
  // Setup File IO
  FileSystem.begin();
  // Upload script used to gain network statistics
  uploadScript();
}
void loop() {
  // Run stats script every 5 secs.
  runScript();
  delay(5000);
}
// this function creates a file into the linux processor that contains a shell script
// to check the network traffic of the WiFi interface
void uploadScript() {
  // Write our shell script in /tmp
  // Using /tmp stores the script in RAM this way we can preserve
  // the limited amount of FLASH erase/write cycles
  File script = FileSystem.open("/tmp/wlan-stats.sh", FILE_WRITE);
  // Shell script header
  script.print("#!/bin/sh\n");
  // shell commands:
  // ifconfig: is a command line utility for controlling the network interfaces.
  //           wlan0 is the interface we want to query
  // grep: search inside the output of the ifconfig command the "RX bytes" keyword
  //       and extract the line that contains it
  script.print("ifconfig wlan0 | grep 'RX bytes'\n");
  script.close();  // close the file
  // Make the script executable
  Process chmod;
  chmod.begin("chmod");      // chmod: change mode
  chmod.addParameter("+x");  // x stays for executable
  chmod.addParameter("/tmp/wlan-stats.sh");  // path to the file to make it executable
  chmod.run();
}
// this function run the script and read the output data
void runScript() {
  // Run the script and show results on the Serial
  Process myscript;
  myscript.begin("/tmp/wlan-stats.sh");
  myscript.run();
  String output = "";
  // read the output of the script
  while (myscript.available()) {
    output += (char)myscript.read();
  }
  // remove the blank spaces at the beginning and the ending of the string
  output.trim();
  //Serial.println(output);
  //Serial.flush();
  Console.println(output);
  Console.flush();
}

Comments powered by CComment