/etc/init.d/dnsmasq disable
/etc/init.d/dnsmasq stop

Or

uci set dhcp.lan.ignore=1
uci commit dhcp
/etc/init.d/dnsmasq restart

 

 

 

Write comment (0 Comments)
  • configuration 1 : wifi connected to my home wifi as client, ethernet cable sometimes connected.
  • configuration 2 : wifi as (bridged or not) AP using the ethernet cable.
  • configuration 3 : wifi as AP, without ethernet cable.

 configuration 1 : sta for managed (client) mode

uci import </root/sta.conf
reboot

configuration 2 : bridge mode

uci import </root/bridge.conf
reboot

configuration 3 : ap mode Access Point

uci import </root/ap.conf
reboot

 

Write comment (0 Comments)

Log into your router, using the LuCi frontend by click advanced configuration panel link

 

 

go to the Network/Interfaces tab: There you should see your LAN device. Edit it to have an appropriate IP address from your local subnet. Most often your network will be 192.168.0.0 Lets put in a static IP address, so we can find our router in case something goes wrong. Also make sure to set the netmask (in this case 255.255.255.0), gateway and DNS server (both probably should point to your router, 192.168.0.1). make sure Disable DHCP for this interface as well.

 

 Now go to the Physical Settings tab. Here, it's important to check "Bridge interfaces" and to select both the ethernet adapter, and the wireless network. One of  devices will say "wan", the other one will say "lan". Last click save & apply 

 

Set bridge mode between 2 AP(Router,Yun):

wlan0 (WIFI) and eth1 (ethernet) bridge together as br-lan 

br-lan (wlan0,eth1 )

static ip:192.168.0.2 

backup system wide setting:

uci export > /root/bridge.conf

whenever you need restore it:

uci import </root/bridge.conf
reboot

 

 

Write comment (0 Comments)

Setup STA mode first:

/index.php/network-and-yun/28-sta-for-managed-client-mode

Switch to first BSSID:

#!/bin/ash
uci set wireless.@wifi-iface[0].bssid=14:CF:E2:A2:XX:XX
uci commit 
wifi down; wifi up
/etc/init.d/network  restart

Switch to second BSSID:

#!/bin/ash
uci set wireless.@wifi-iface[0].bssid=48:5B:39:E7:XX:XX
uci commit 
wifi down; wifi up
/etc/init.d/network  restart

 

 

Write comment (0 Comments)